Product is a Magpul PMAG 30 AR GEN M3, 30-round polymer magazine in the caliber selected above for use in AR-15 compatible weapons with the graphic printed directly on both sides of the magazine. Image is printed directly on the magazine for a durable finish for years to come. Will not fade or chip, unless the actual magazine becomes damaged.
Black magazine will be used for .223 Remington/ 5.56x45mm and .300 AAC Blackout.
You will receive the magazine with the graphic printed on both sides of it.
NOTE: BOTTOM, FRONT, AND BACK OF MAG WILL STILL BE THE FACTORY MAG COLOR. ONLY SIDES ARE PRINTED IN FULL COLOR.
Magazine Shipping Restrictions
10 Round .223 Remington / 5.56x45mm NATO will be a 10/30 Magpul Magazine with a riveted bottom plate. Magazine features a shorter spring and internal mag limiter.
15 Rounds and 10 Round 300 Blackout will be a 30 round body magazine modified by Calegalmags. An internal limiter will be placed inside the magazine and bottom plate will be sealed on using polymer glue. Removal of bottom plate will cause damage to magazine.
NOTE: BOTTOM, FRONT, AND BACK OF MAG WILL STILL BE THE FACTORY MAG COLOR. ONLY SIDES ARE PRINTED IN FULL COLOR.
Magazine Shipping Restrictions
10 and 15 Round Magazines: Calegalmags modifies these Magpul Pmag magazines to 10 round capacity internally. They manufacture their own proprietary limiters which they insert into the magazine to limit capacity to 10 rounds maximum. The limiters are chemical and heat resistant and will never break or fail. In addition to the limiter, Calegalmags will seal the bottom of the magazine closed "permanently" with a industrial grade polymer adhesive (no rivets or blind pins). This magazine can not be taken apart without destroying it! The magazine spring inside maintains full length of travel in the magazine body and is not restricted in any way with modification. Extended handling times for magazines needing modification.
